Wireless HDMI Extender VGA-EXWHD10

[This wireless HDMI transmitter/receiver set allows you to wirelessly transmit HDMI signals and output them from LCD TVs and projectors located at a distance! The transmitter can be expanded up to 20 units, and switching between outputs is instantaneous with a single button.]

● HDMI signals can be wirelessly extended up to 15m in Full HD (1920x1080 pixels) resolution.
*Depending on your environment.
● Simply connect the transmitter to the HDMI-equipped computer, document camera, or other video output device, and the receiver to the LCD TV or projector to instantly create a wireless setup.
● The transmitter and receiver are pre-paired, so they start linking automatically upon connection. No complicated software settings are required.
● Powered by USB and without a power switch, it wirelessly connects the transmitter and receiver as soon as power is supplied. Ideal for wireless connections in environments where periodic restarts are required or where switching is difficult.
● High-quality audio signals can be wirelessly extended simultaneously with high-quality HDMI video signals.
● Technical standards conformity certification (TELEC certification) for use in Japan has been obtained.

*When this product is started up or when the transmitter and receiver are not connected, the default screen of this product will be displayed on the TV or projector.

■Supported resolutions: 1920x1080 (1080p), 1280x720 (720p), 720x576 (576p), 720x480 (480p)
■Transmission distance: Up to 15m (without obstacles)
*May vary depending on your environment.
■HDCP: HDCP1.3 *The display and output device must also be HDCP compatible.
■Operating frequency band: 5.1GHz to 5.25GHz
■Interface: Input (transmitter)/HDMI Type A (19pin) male x1
Output (receiver)/HDMI Type A (19pin) male x1
■Supported audio format: PCM
■Video delay: within 100ms
■Environmental conditions: Operating/0 to 40 degrees Celsius, humidity 10 to 80% (non-condensing)
Storage/-10 to 60 degrees Celsius, humidity 5 to 90% (non-condensing)
■Power consumption: 2.5W (maximum)
■Dimensions: W32 x D83 x H13mm
■Weight: Approx. 27g
■HDMI standard: HDMI Ver1.4
■Number of units usable in the same space: Up to 4 sets within 200 square meters
*Operation not guaranteed
■Set contents: Transmitter x1, receiver x1, USB power supply cable (approx. 70cm x2), HDMI extension cable (approx. 10cm x2), instruction manual x1
≪Caution≫
*This product has the capability to use up to 4 sets simultaneously in the same space (approx. 200 square meters), but the operating results will vary greatly depending on the connected equipment and radio wave environment. Operation is not guaranteed when using multiple sets simultaneously.
*If this product is used in adjacent rooms, it may not operate properly if the distance range is within which radio waves interfere. In that case, please stop using one of the products.
*Since the transmitter and receiver of this product are individually paired, there will be no interference with unpaired devices.
*Operation is not guaranteed with all devices.
*The connection time between the transmitter and receiver, and the time until the video is displayed, vary from approximately 20 to 50 seconds depending on the equipment environment and radio wave environment.