SATA-to-USB3.0 conversion cable USB-CVIDE3

[High-speed transfer with USB 3.0 support! Easy connection of HDDs, SSDs, and optical drives!]

●Maximizes the capabilities of high-speed rotating hard disks and Blu-ray writing drives with USB 5Gbps connection.
●Converts internal Serial ATA hard disks to USB for connection.
・Converts Serial ATA 3.5-inch (2.5-inch) HDD to USB 5Gbps
・Converts SSD (Serial ATA) and optical drives (Serial ATA) to USB 5Gbps
※Can also be used in USB 2.0 environments. (In this case, it will not operate in "Super Speed" mode (transfer speed 5Gbps/theoretical value).)
●Since the cable is directly attached to each drive, no case is needed and replacement is easy.
※After installing the HDD in the main unit, the HDD circuit board will be exposed, so please be careful not to let static electricity or metal come into contact with the circuit board.
●No driver installation is required.
●Equipped with an ON/OFF switch for safe attachment and detachment.
●AC adapter is included.

■Interface:
USB side//USB 5Gbps (USB3.2 Gen1/3.1 Gen1/3.0) compliant
HDD side/Serial ATA
■Size: W67×D40×H15mm (main unit only)
■Weight: Approx. 70g (main unit only)
■USB connection cable length: Approx. 0.8m
■Accessories: AC adapter ×1, instruction manual ×1
≪Caution≫
*When the AC adapter is connected to the main unit, the metal terminals may not go all the way in and will stick out by about 5mm, but this does not pose a safety problem.
*To use as a USB 5Gbps device, you must have a USB 5Gbps compatible host adapter or a model equipped with a USB 5Gbps compatible port.
*When connected to a USB 2.0 compatible USB port, only USB 2.0 transfer speeds are supported.
*This product does not include a hard disk.
*Compatibility may vary depending on the model. *We do not guarantee the internal data or the hard drive itself for any reason whatsoever if the hard drive is installed in this product. *Due to the nature of the product, we do not guarantee operation in all environments or combinations.