Leakage circuit breaker tap TAP-BR36LN-1

[Equipped with a built-in ground fault circuit breaker, which activates in the event of a ground fault to prevent accidents.]

●This product is equipped with a ground fault circuit breaker, which automatically shuts off the electrical circuit in the event of a ground fault or overcurrent, preventing fire and electric shock accidents.
●In addition to ground faults caused by deterioration of insulation in electrical circuits due to aging, damage from salt, etc., or water damage to home appliances, it can also prevent serious accidents caused by overcurrents resulting from short circuits in electrical circuits or overuse of electrical appliances.
●Recommended as a power strip for electrical appliances that are prone to ground faults, such as washing machines, refrigerators/freezers, and vending machines.
●In places with a lot of moisture or humidity, such as offices, factories, and medical facilities, there is a risk of ground faults. A power strip with a built-in ground fault circuit breaker can protect you from ground faults.
●When the breaker operates, both lines (voltage side and ground side) are shut off.
※The ground wire is always connected.
●The breaker section has a transparent cover that can be opened and closed to prevent accidental operation, so you can use it with peace of mind. It comes with an operation test button.
*Please check the operation about once a month using the operation test button. If the circuit breaker trips, eliminate the cause and use it again.
●Connected devices can be turned ON/OFF all at once.
●Equipped with a power indicator lamp that allows you to check the power status at a glance.
●Equipped with an earth terminal that has the effect of dissipating noise generated from the device.
●The locking type outlet prevents accidental plug removal, so you can use it with peace of mind.
●Equipped with an insulating cap to prevent tracking fires.
●Equipped with a strong magnet on the back, so it can be easily temporarily fixed to the panel of a steel desk, etc.
●Equipped with screw and hook holes for temporarily fixing the power strip.
≪Caution≫
*The power consumption of the plugged-in device is limited to 1500W. Please check the power of the connected device before use.
*This product can only be used in Japan. (It cannot be used with anything other than AC100V)
*This product is for indoor use only. It cannot be used outdoors.
*Please note that Sanwa Supply will not be held responsible for any loss or alteration of data on your computer or other devices when using this product.

■Rated capacity: 15A・125V (up to 1500W total)
■Plug: 3P (with tracking fire prevention insulation cap)
■Outlets: 3P・6 outlets (locking type)
■Cord: VCTF 2.0 sq mm (SQ) x 2 cores, 0.75 sq mm (SQ) x 1 core
Finished outer diameter approx. 8.5 mm
■Cord length: 1 m
■Size: W429 x D44 x H30 (61) mm
*The value in parentheses is the height of the breaker cover.
■Outlet spacing: 40 mm
■Leakage circuit breaker: Sensitivity current/15 mA
■Leakage circuit breaker reaction time: approx. 0.1 seconds
■Usage area: Japan only. Cannot be used outside of Japan. ■Certification: Complies with the technical standards of the Electrical Appliances and Materials Safety Act (PSE)