3-input 1-output DisplayPort Switch (8K/30Hz compatible, with remote control) SW-DP31R

[A 3-input, 1-output DisplayPort switch compatible with 8K/30Hz resolution. Comes with a remote control for easy switching from a distance.]

●This DisplayPort switch allows you to switch the DisplayPort output (video and audio) of three computers to one DisplayPort-equipped display.
●Supports a maximum resolution of 7680x4320 (8K/30Hz), allowing you to output a beautiful, high-definition DisplayPort signal. *1
●Comes with a remote control for easy switching from a distance.
●Switching can also be done using the buttons on the unit itself, and it is a fully manual switching type that does not automatically switch when other DisplayPort devices are started or shut down. *2
●All cables can be arranged in the same direction for a clean installation.
●HDCP1.4 (High-bandwidth Digital Content Protection) compliant product.
●All DisplayPort terminals are gold-plated. Resistant to rust and prevents signal degradation.
●Supports Dolby True HD and DTS HD Master Audio.

*1 Does not support HDR (high brightness).
※2 Depending on the DisplayPort device, the display may need to be recognized at startup.
In that case, you will need to switch ports before starting the DisplayPort device.
※3 Connecting and using a USB power cable is recommended for stable operation.
This product supports bus power operation, which is powered by the DisplayPort device, but
the screen may temporarily go dark or the image may be interrupted when the device starts up.
In that case, connecting a USB power cable and providing a stable power supply to this product may resolve the issue.

[About screen display time when switching]
When switching ports, it usually takes about 3 to 5 seconds for the image to be displayed.This is not a symptom of this product,
but the time it takes for the DisplayPort device to recognize the display and start outputting video, and is due to the performance of the DisplayPort device.
This product itself completes the port switching the moment the switch button is pressed.



■Supported resolutions: 8K/7680x4320 (30Hz)
3840x2160 (144Hz, 4:4:4)
3840x2160 (120Hz, 4:4:4)
3840x2160 (60Hz, 4:4:4)
3840x2160 (30Hz, 4:4:4)
2560x1440 (60Hz)
2048x1080 (60Hz)
1920x1200 (60Hz)
1920x1080 (60Hz)
1680x1050 (60Hz)
1600x1200 (60Hz)
1280x1024 (60Hz)
1280x800 (60Hz)
1024x768 (60Hz)
800x600 (60Hz)
■Maximum resolution: 8K/7680x4320 (30Hz)
■Interface:
Input: DisplayPort female x3
Output: DisplayPort female x1
■Input DDC signal: 5V
■Data rate: 8.1Gbps
■Pixel clock: 810MHz (maximum)
■HDCP: HDCP1.4
*The display must also be HDCP compatible.
■DisplayPort standard: DisplayPort 1.4 compatible
■Switching method: Switching button on the unit, remote control
■Power consumption: 1.2W (maximum)
■Environmental conditions: Operating temperature 0 to 50 degrees Celsius, humidity 80% or less (no condensation)
Storage temperature -20 to 60 degrees Celsius, humidity 80% or less (no condensation)
■Size: W116 x D54.6 x H17.8 mm
■Weight: Approx. 101g
■Set contents: Main unit, remote control (battery included/CR2025) x1, USB cable (for power supply, approx. 1m) x1, instruction manual and warranty