Blue light cut LCD protective film with fingerprint and reflection protection for Microsoft Surface Go 2 LCD-SF9BCAR

[Microsoft Surface Go 2 Compatible Blue Light Cut LCD Protective Anti-Fingerprint Anti-Reflective Film]

●Cuts approximately 26% of the main blue light wavelength of 450nm from LED backlights.
●Concentrated blue light cut that is not easily absorbed by the lens of the eye and may damage the retina. Recommended for preventing eye strain.
●Reduces blue light and absorbs it both inside and outside the film, making it gentle on the eyes.
●Anti-fingerprint coating prevents fingerprints from sticking to the film.
●Prevents reflection on the screen, making computer work more comfortable.
●Uses silicone material on the adhesive surface, so it adheres perfectly to the entire surface, including the LCD screen. (Excluding the camera area, etc.)
●No double-sided tape is required.
●It is a dedicated type, so it can be used as is without cutting.
*The size has been slightly reduced from the outer frame size to make it easier to stick.
●Compatible with touch panels.
●Protects the LCD screen from dust, fingerprints, scratches, etc.
＜How to Use＞
1. Clean the LCD screen and the main unit.
* Dust trapped inside can cause air bubbles.
2. Peel off the release film with the raised part of the protective film.
* Be careful not to let dust get on it.
3. Slowly apply the protective film from the corner of the front of the main unit.
* Be careful not to press too hard on the LCD screen when applying, as this may cause damage.

■Size (inches): 10.5
■Material: Adhesive surface/silicone film, outer layer/PET
■Thickness: 0.2mm
■Size: W241.6xD0.2xH171.6mm
■Weight: 14g
■Type: Blue light cut, anti-fingerprint, anti-reflective
■Touch panel: Compatible
■Reflectance: 1.69%
■Transmittance: 78.3%
■UV cut: 99.9%
■Surface hardness (H): 2 to 3H
■Antibacterial properties: None
■Quantity: 1 sheet
≪Notes≫
*The film is blue light cut and anti-fingerprint.
*The above are measured values ​​and not guaranteed values.