Blue Light Blocking Anti-Fingerprint Anti-Reflective Screen Protector Film for iPad mini 4 LCD-IPM4BCAR

[Blue Light Cut LCD Protective Anti-Fingerprint Anti-Reflective Film for iPad mini 4.]

●Can cut approximately 26% of blue light at its main wavelength (450nm).
●Concentrated cut of blue light, which is not easily absorbed by the lens of the eye and may damage the retina. Recommended for preventing eye strain.
●Reduces blue light and further absorbs it both inside and outside the film, minimizing its impact on the eyes.
●Uses silicone material on the adhesive surface, so it adheres perfectly to the entire surface, including the LCD screen. (Excluding the camera, home button, etc.)
●No double-sided tape is required.
●It is a dedicated type, so it can be used as is without cutting.
*The size has been slightly reduced from the outer frame size to make it easier to apply.
●Compatible with touch panels.
●Protects the LCD screen from dust, fingerprints, scratches, etc. The anti-fingerprint coating prevents fingerprints from adhering to the film. In addition, the anti-reflective coating prevents light reflection on the screen, making work more comfortable.
＜How to Use＞
1. Clean the LCD screen and the main unit.
(If dust gets trapped, it can cause air bubbles.)
2. Peel off the release film with the raised part of the protective film.
(Be careful not to let dust get on it.)
*Discard the release film.
3. Slowly apply the protective film from the corner of the front of the main unit.
*Please be careful not to press too hard on the LCD screen when applying, as this may cause damage.
*If dust or other debris adheres to the adhesive surface of the protective film, remove it with cellophane tape or similar.

■Material: Adhesive surface/silicone film, outer surface/PET
■Size: W131.5 x H199.8 mm
■Thickness: 0.2 mm
■Quantity: 1 sheet
■Reflectance: 1.69%
■Transmittance: 78.3%
■UV cut: 99.9%
■Surface hardness: 2 to 3H
≪Notes≫
*The above are measured values ​​and not guaranteed values.