Antibacterial and antiviral glossy screen protector for Apple iPad mini 6th generation (LCD-IPM21ABVG)

[Apple iPad mini 6th Generation (2021) Compatible LCD Protective Antibacterial and Antiviral Glossy Film.]

●SIAA antiviral processing (ISO 21702) and SIAA antibacterial (ISO 22196) certified.
●Uses Fujifilm Corporation's medical-grade antibacterial and antiviral film "Hydro Ag+ VIRUS PLUS film".
●By combining a silver-based antibacterial agent and a superhydrophilic polymer, the surface of the film is coated with the silver-based antibacterial agent, and silver ions are constantly supplied to the film surface from the silver-based antibacterial agent in the film, so high antibacterial and antiviral performance is maintained for a long period of time.
●Achieves high basic performance as a protective film for LCD displays.
●The surface has a mirror-like finish and a hard coat layer that prevents scratches, and because it is hydrophilic, dirt is less noticeable.
●Since silicone material is used on the adhesive surface, it adheres perfectly to the entire surface, including the LCD screen.
●Double-sided tape is not required.
●Compatible with touch panels.
●Protects the LCD screen from dust, fingerprints, scratches, etc.


＜How to use＞
1. Clean the LCD screen and the main unit.
*Dust trapped under the film can cause air bubbles.
2. Peel off the release film with the protruding part of the protective film.
*Be careful not to let dust get on it.
*Discard the release film.
3. Slowly apply the protective film from the corner of the front of the main unit.
*Be careful not to press too hard on the LCD screen when applying, as this may cause damage.
*If dust or other debris adheres to the adhesive surface of the protective film, remove it with cellophane tape or similar.

■Size (type): 8.3
■Material: Adhesive surface/silicone film, outer surface/PET
■Thickness: Approx. 0.2mm
■Size: W131.6xD0.2xH192.1mm
■Weight: 8g
■Touch panel compatible: Yes
■Transmittance: 90%
■Haze: 5% ± 2%
■Surface hardness (H): 2H or higher
*JIS K5600 test load 750g
■Antibacterial properties: Yes
Uses Fujifilm Hydro Ag+ VIRUS PLUS film
■Quantity: 1 sheet
■Antibacterial performance: Antibacterial activity value 6.1
*JIS Z2801 Escherichia coli, Staphylococcus aureus
■Antiviral performance: Influenza virus/Antiviral activity value 3.8 (detection limit) *ISO Compliant with 21702
Novel Coronavirus (SARS-CoV-2/Hu/KngFJ/232RD5)/Antiviral activity value 2.3 (detection limit) *Compliant with ISO 21702
■Adhesive strength (N/25mm): 0.03 *Compliant with JIS Z0237 Adhered to PET film 25um Peeling speed 300mm/min Peeling angle 180 degrees (folded back on the adherend side)
■Contact angle: Purified water/67.5±7.5°
Oleic acid/5.0±1.0°
■Chemical resistance: Sodium hypochlorite (300ppm) resistance/200 friction cycles/No deterioration in appearance, antibacterial, or antiviral performance
Alcohol resistance (80% ethanol)/200 friction cycles/No deterioration in appearance, antibacterial, or antiviral performance
■Cleaning resistance: 5000 dry wipes and 5000 wet wipes each/No deterioration in appearance, antibacterial, or antiviral performance
■Durability: Equivalent to 9 years outdoors, cycle thermo heating and light exposure test/No deterioration in appearance, antibacterial, or antiviral performance
≪Notes≫
*The above are measured values ​​and not guaranteed values.
*The film is an antibacterial and antiviral glossy type.
*Performance other than adhesive strength is the result of testing the HC film alone without the adhesive layer.