29.0-inch widescreen (21:9) LCD protective film with antibacterial and antiviral properties, glossy finish, LCD-ABVG290W

[29.0-inch wide (21:9) LCD protective antibacterial and antiviral glossy film.]

●SIAA antiviral processing (ISO 21702) and SIAA antibacterial (ISO 22196) certified.
●Uses Fujifilm Corporation's medical-grade antibacterial and antiviral film "Hydro Ag+ VIRUS PLUS film".
●By combining a silver-based antibacterial agent and a superhydrophilic polymer, the surface of the film is coated with the silver-based antibacterial agent, and silver ions are constantly supplied to the film surface from the silver-based antibacterial agent in the film, so high antibacterial and antiviral performance is maintained for a long period of time.
●Achieves high basic performance as a protective film for LCD displays.
●The surface has a mirror-like hard coat layer that prevents scratches, and because it is hydrophilic, dirt is less noticeable.
●Since silicone material is used on the adhesive surface, it adheres perfectly to the entire surface, including the LCD screen. *Excluding the camera area, etc.
●Double-sided tape is not required.
●Compatible with touch panels.
●Protects the LCD screen from dust, fingerprints, scratches, etc.
●Can be applied neatly using the included spatula.

＜How to use＞
1. With the computer powered off, wipe the LCD screen clean with a soft cloth such as a cleaning cloth.
*Dust and dirt can cause air bubbles when applying.
2. Peel off the release sheet before applying the film. The side that is peeled off will be the side that adheres to the LCD screen.
*When peeling off the release sheet, do so in an area with as little dust as possible to prevent dust from sticking due to static electricity.
3. Place the film on the LCD screen and gently and slowly apply it from one edge. It will be easier to apply if you push out the air with a soft cloth or the included spatula.

■Size (inches): 29.0 inch wide
■Material: Adhesive surface/silicone film, outer surface/PET
■Thickness: Approx. 0.156 mm
■Size: W672 x D0.156 x H283 mm
■Weight: 58 g
■Touch panel: Compatible
■Transmittance: 90%
■Haze: 5% ± 2%
■Gloss (60 degrees): 150% ± 20%
■Surface hardness (H): 2H or higher
*JIS K5600 test load 750 g
■Antibacterial properties: Yes
Uses Fujifilm Hydro Ag + VIRUS PLUS film
■Quantity: 1 sheet
■Antibacterial performance: Antibacterial activity value 6.1
*JIS Z2801 E. coli, Staphylococcus aureus
■Antiviral performance: Influenza virus/Antiviral activity value 3.8 (detection limit) *Compliant with ISO 21702
Novel Coronavirus/(SARS-CoV-2/Hu/KngFJ/232RD5)/Antiviral activity value 2.3 (detection limit) *Compliant with ISO 21702
■Adhesive strength (N/25mm): 0.03 *Compliant with JIS Z0237 Adhered to PET film 25um Peeling speed 300mm/min Peeling angle 180 degrees (folded back on the substrate side)
■Contact angle: Purified water/67.5±7.5°
Oleic acid/5.0±1.0°
■Chemical resistance: Sodium hypochlorite (300ppm) 200 rubs/no deterioration in appearance, antibacterial and antiviral performance
Alcohol (80% ethanol) 200 rubs/no deterioration in appearance, antibacterial and antiviral performance
■Wiping resistance: Dry wiping 5000 times/no deterioration in appearance, antibacterial and antiviral performance
Wet wiping 5000 times/no deterioration in appearance, antibacterial and antiviral performance
■Durability: Equivalent to 9 years outdoors, cycle thermo heating and light exposure test/no deterioration in appearance, antibacterial and antiviral performance
■Set contents: Main unit x1, spatula for application x1, instruction manual
≪Notes≫
*The film is an antibacterial and antiviral glossy type.
*Performance other than adhesive strength is based on test results with the HC film alone, without the adhesive layer.
*The above are measured values ​​and not guaranteed values.