Gigabit Switching Hub (5 ports, PoE power supply and receiving compatible) LAN-GIH5PSEPD

[Gigabit Switching Hub (5 Ports) that operates on PoE power and can also supply power]

●This is a 5-port 10BASE-T/100BASE-TX/1000BASE-T compatible switching hub.
*For PoE power reception only. AC adapter is not included.
●Port 5 is a PoE power reception port, and it is a PSE and PD compatible hub that can supply power to each device from ports 1 to 4.
●Since the main unit operates on PoE power reception, a power cable is not required.
*To receive power, a separate PoE output compatible hub or injector connection is required.
●Equipped with a loop detection function, it will notify you with an LED when a loop is detected.
●It is small, so it does not take up much space when installed.
●Communication and power supply status can be checked with an LED.
＜Precautions＞
*The amount of heat generated by this product differs depending on whether it is only powered on or communicating. In particular, if a large amount of communication is performed continuously, the main unit may overheat. Therefore, continuous use in environments with poor heat dissipation (poor ventilation) may lead to deterioration of internal components and reduce the product's lifespan. When using the product, please ensure that nothing is placed on top of the unit and that there is at least 10 cm of space around the ventilation openings. The operating temperature is the temperature during continuous use, not at the time of installation. Please note that the temperature will fluctuate significantly during use compared to the initial power-on state.
＜Notes on PoE power supply＞
*Please select a Category 6 straight cable or a cable with a thickness of 24AWG or greater for PoE power supply.
Recommended cables/Sanwa Supply
・KB-T6POE series (22AWG)
・KB-T6TS series (23AWG)
・KB-T5T series (24AWG solid wire)
*Please check the required power before using it with the powered device (PD).
*This product is for indoor use only.

■Number of ports: 5 ports
■Maximum transmission speed: 1000Mbps (1000BASE-T)
■Port configuration: (Ports 1 to 4) 1000BASE-T/100BASE-TX/10BASE-T (RJ-45) AUTO-MDIX PoE power supply compatible
(Port 5) 1000BASE-T/100BASE-TX/10BASE-T (RJ-45) AUTO-MDIX PoE power reception compatible
■Standards: IEEE 802.3 (10BASE-T Ethernet)
IEEE 802.3u (100BASE-TX Fast Ethernet)
IEEE 802.3ab (1000BASE-T)
IEEE 802.3x (Flow control for Full-Duplex)
IEEE 802.3af/at (Power over Ethernet/Power over Ethernet Plus)
IEEE 802.3az (Energy Efficient Ethernet)
■Access method: CSMA/CD
■Switching method: Store & Forward
■Communication mode: Full duplex/Half duplex
■PoE power supply method: Alternative A
■LED indicator: (Power ON/OFF status)
(Link/Act status) Green LED on/blinking on each port
(PoE status) Orange LED on/off on each port (1 to (4 ports supply power, 5 ports receive power)
(Power status) Power indicator orange LED on/off
(Loop detection status) LOOP indicator red LED on/off
■Compatible LAN cables:
For data communication: UTP Category 5e or higher (1000BASE-T), UTP Category 5 or higher (100BASE-TX), UTP Category 3 or higher (10BASE-T)
For PoE communication: UTP Category 5e/6/6a straight cable with a thickness of 24AWG or more
*Please use a PoE-compatible LAN cable.
■Buffer memory: 128kbyte (dynamically allocated to each port)
■MAC address table: 2K
■Jumbo frame: Supported
■AutoMDI/MDI-X: Supported
■Auto-negotiation: Supported
■Power supply: Built-in power supply *PSE certified
■Power consumption of the main unit: Approx. 5W
■Maximum power supply (PoE-compatible port output):
When powered by IEEE802.3af/Total approx. 10W (total for all ports)
When powered by IEEE802.3at/Total approx. 25W (total for all ports)
■Operating environment: Operating temperature and humidity/0 to 45 degrees Celsius, 10 to 90% (non-condensing)
Storage temperature and humidity/-20 to 70 degrees Celsius, 5 to 90% (non-condensing)
■Case material: Metal
■Fan specifications: Silent fanless
■Size: Approx. W130 x D97 x H24mm
■Weight: Approx. 330g
■Accessories: 4 rubber feet, instruction manual (warranty)