Gigabit-compatible PoE switching hub (5 ports, with magnet) LAN-GIGAPOE55

[A compact Gigabit communication compatible PoE switching hub that supports IEEE802.3at (PoE+) and can be fixed to steel surfaces with a bottom magnet]

●This is a 5-port switching hub that supports Gigabit and PoE power supply.
●Ports 1 to 4 support PoE output, and port 5 is an uplink port that does not support PoE output.
●It supports IEEE 802.3at (PoE+) and can supply a maximum of 30W per port. (Total of all ports up to 60W)
●Equipped with a strong magnet, it can be securely fixed to steel desks, cabinets, etc.
●The metal casing provides excellent heat dissipation.
●It is fanless, so it operates quietly.
●Equipped with an AUTO-MDIX function that can be used without worrying about straight cables or crossover cables.
●Equipped with an AUTO-Negotiation function that can automatically switch between 10/100/1000Mbps depending on the connected device.
●Equipped with a power-saving function that automatically detects unlinked ports and reduces power supply.
If all computers on all ports are shut down, power saving of up to 70% is possible.

【Caution】
・The amount of heat generated by this product differs depending on whether it is only powered on or communicating.
・In particular, if a large amount of communication is performed continuously, the unit may overheat.
・Continuous use in an environment with poor ventilation and heat dissipation may lead to deterioration of internal components and reduce the product's lifespan.
・When using the unit, do not place anything on top of it and leave a space of at least 10 cm around the ventilation opening.

＊Precautions when using PoE ports
For PoE power supply, please select a Category 6 straight cable, 24AWG/23AWG or higher.
Recommended Cables
Sanwa Supply
・KB-T6POE Series
・KB-T6ATS Series
・KB-T5T Series


■Number of Ports: 5 ports
■Maximum Transmission Speed: 1000Mbps (1000BASE-T)
■Compliant Standards: IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3ab (1000BASE-T), IEEE802.3x (Flow control for Full-Duplex), IEEE802.3af/at
■Access Method: CSMA/CD
■Switching Method: Store & Forward
■Communication Mode: Full Duplex/Half Duplex
■Port Configuration:
1 to 4 ports: 1000BASE-T/100BASE-TX/10BASE-T
PoE/PoE+
Port 5: 1000BASE-T/100BASE-TX/10BASE-T (Uplink only)
■Terminal shape: RJ-45 type 8-pin (shielded type)
■AutoMDI/MDI-X: Supported
■PoE support: Supported
■PoE compatible port output: af standard: 15.4W/1 port (maximum), at standard: 30W/1 port (maximum)
Total of all ports up to 60W
■PoE power supply method: Alternative A
■Compatible LAN cable:
For data communication: UTP Category 5e or higher (1000BASE-T), UTP Category 5 or higher (100BASE-TX), UTP Category 3 or higher (10BASE-T)
For PoE communication: UTP Category 5e/6/6a straight cable with a thickness of 24AWG or more
*Please use a PoE compatible LAN cable.
■Buffer Memory: 128Kbyte
■Flow Control: Supported
■Switch Fabric: 10Gbps
■Maximum Packet Transfer Capacity: 7.5
■Filtering Speed: 1,488,000 packets/sec (1,000Mbps), 148,800 packets/sec (100Mbps), 14,880 packets/sec (10Mbps)
■Jumbo Frames: Supported
(9K)
■MAC Address Table: 2K
■Auto-Negotiation: Supported
(1,000/100/10Mbps)
■VCCI Standard: VCCI Class A
■Power Supply Method: AC Adapter
■Power Supply: AC Adapter
■Input Voltage: AC100 to 240V±10% 50/60Hz
■Maximum Power Consumption: 65W
■AC Adapter Cable Length: 1.2m
■Power Cable Length: 1.5m
■Operating Environment Conditions: Temperature/0 to 40 degrees Celsius, Humidity/10 to 90%
(Non-condensing)
■Storage Environment Conditions: Temperature/-40 to 70 degrees Celsius, Humidity/5 to 90%
(Non-condensing)
■Housing Material: Metal
■19-inch Mounting: None
■Magnetic Mounting: Yes
■Wall Mounting: None
■Fan Specifications: Silent Fanless
■MTBF: 256213 hours
■Set Contents:
Dedicated AC Adapter (Cable Length approx. 1.2m) x 1
Power Cable (approx. 1.5m) x 1
Ground Wire (approx. 1m) x 1
Instruction Manual x 1
■Color: Black