Gigabit-compatible switching hub (3 ports, with magnet) LAN-GIGAP301BK

[A 1000BASE-T compatible switching hub with a magnet that can be fixed to steel desks, etc.]

●This is a 3-port switching hub compatible with 1000BASE-T.
●Equipped with a strong magnet, it can be securely fixed to steel desks, cabinets, etc.
●Its compact design with a plastic case means it can be installed anywhere.
●Equipped with a loop detection function that will notify you of loop failures.
*In an environment where it is mixed with other products that have the same function, operation may become unstable.
●It is fanless, so it operates quietly.
●Equipped with an AUTO-MDIX function that can be used without worrying about straight cables or crossover cables.
●Equipped with an AUTO-Negotiation function that can automatically switch between 10/100/1000Mbps depending on the connected device.
●Equipped with a power saving function that automatically detects unlinked ports and reduces power supply. Power saving of up to 71% is possible when all computers on all ports are shut down.
●The power supply is an AC adapter and is equipped with a cap to prevent tracking fires.

＜Caution＞
*The amount of heat generated by this product differs depending on whether it is only powered on or communicating.
*In particular, if a large amount of communication is performed continuously, the unit may overheat.
*Continuous use in an environment with poor ventilation and heat dissipation may lead to deterioration of internal components and reduce the product's lifespan.
*When using the unit, do not place anything on top of it and leave a space of at least 10 cm around the ventilation opening.

■Standards: IEEE 802.3 (10BASE-T Ethernet)
IEEE 802.3u (100BASE-TX Fast Ethernet)
IEEE 802.3ab (1000BASE-T)
IEEE 802.3x (Flow control for Full-Duplex)
■Access Method: CSMA/CD
■Switching Method: Store & Forward
■Communication Mode: Full-Duplex/Half-Duplex
■Port Configuration: 1000BASE-T/100BASE-TX/10BASE-T (RJ-45)
AUTO-MDIX x 3 ports
■Number of Ports: 3 ports
■Compatible LAN Cable: UTP Category 5e or higher (1000BASE-T), UTP Category 5 or higher (100BASE-TX), UTP Category 3 or higher (10BASE-T)
■Buffer Me Mori: 128kbytes (dynamically allocated to each port)
■MAC Address Table: 2048
■Switch Fabric: 6Gbps
■Maximum Packet Forwarding Capacity: 4.3Mpps
■Flow Control: Yes
■AutoMDI/MDI-X: Supported
■Filtering Speed: 1,488,000 packets/sec (1,000Mbps), 148,800 packets/sec (100Mbps), 14,880 packets/sec (10Mbps)
■Auto Negotiation: Supported (1,000/100/10Mbps)
■VCCI Standard: CLASS B certification obtained
■Size: W75×D56×H21.5mm
■Weight: Approx. 60g
■Cable length: AC adapter/1.5m (excluding connector)
■Fan specifications: Silent fanless
■Power consumption (MAX): 1.45W
■Housing material: Plastic
■Operating environment: Temperature and humidity during use/0 to 40 degrees Celsius, 10 to 90% (non-condensing)
Temperature and humidity during storage/-20 to 70 degrees Celsius, 5 to 90% (non-condensing)
■Accessories: Instruction manual, AC adapter ×1