{"product_id":"lcd-101kfp","title":"Free-cut type LCD protective film with fingerprint resistance and gloss, compatible with up to 10.1-inch screens - LCD-101KFP","description":"[Supports up to 10.1 inches. Free-cut type LCD protective anti-fingerprint glossy film that can be cut to your desired size.]\u003cbr\u003e\u003cbr\u003e●Uses silicone material on the adhesive surface, so it sticks perfectly.\u003cbr\u003e●Compatible with touch panels.\u003cbr\u003e*Not compatible with special panels such as ultrasonic, electromagnetic induction, or digitizer type.\u003cbr\u003e●No double-sided tape is required.\u003cbr\u003e●Can be cut to your desired size and applied.\u003cbr\u003e●Protects the LCD screen from scratches and dirt. The anti-fingerprint coating prevents fingerprints from adhering to the film.\u003cbr\u003e\u003cbr\u003e＜How to cut the protective film＞\u003cbr\u003e1. Use the graph paper on the back of the package to measure the size of the device you will be applying it to.\u003cbr\u003e2. Using the graph paper, mark four places according to the size of the LCD and decide the size to cut from there.\u003cbr\u003e*For devices with a flat frame, such as tablets, make the size slightly larger (2 to 3 mm) to cover the entire LCD. \u003cbr\u003e*If your model has a step between the LCD screen and the frame, please make the size slightly smaller (2 to 3 mm). If you make it the exact size, it will be difficult to align it in all directions. \u003cbr\u003e3. Place the film itself on top of graph paper and cut it out. (You can cut it with scissors, but we recommend using a utility knife for a clean cut.)\u003cbr\u003e\u003cbr\u003e\u003chow to apply the protective film\u003e\u003cbr\u003e1. Clean the LCD screen and the main body. (If dust gets trapped, it will cause air bubbles.)\u003cbr\u003e2. Peel off the release sheet before applying the film. The side that you peel off will be the side that adheres to the LCD screen. When peeling off the release sheet, please do so in a place with as little dust as possible to prevent dust from sticking due to static electricity.\u003cbr\u003e3. Slowly apply the protective film from one edge. It will be easier to apply if you push out the air with a soft cloth.\u003cbr\u003e*Please be careful not to press too hard on the LCD screen when applying, as this may cause damage. \u003cbr\u003e\u003cbr\u003e＜Caution＞\u003cbr\u003e*Please be careful not to injure yourself when cutting this product with scissors or a utility knife.\u003cbr\u003e*Sanwa Supply assumes no responsibility whatsoever for accidents or damage to equipment caused when cutting this product.\u003cbr\u003e*When applying to the entire surface of a device that is flat to the edges, such as a tablet, the curvature of the corners cannot be measured. Please protect only the LCD display area.\u003cbr\u003e*Cutting the film may put stress on the edges of the film, causing some to lift. Please understand.\u003cbr\u003e\u003cbr\u003e■Material: Adhesive surface\/silicone film, Outer surface\/PET (polyethylene terephthalate)\u003cbr\u003e■Size: W190xD0.2xH270mm\u003cbr\u003e■Quantity: 1 sheet\u003cbr\u003e■Reflectance: 4.52%\u003cbr\u003e■Transmittance: 93.5%\u003cbr\u003e■UV cut: 99.9%\u003cbr\u003e■Surface hardness: 2 to 3H\u003cbr\u003e*The above are measured values ​​and not guaranteed values.\u003c\/how\u003e","brand":"SANWA SUPPLY","offers":[{"title":"Default Title","offer_id":47923560120425,"sku":"LCD-101KFP","price":2019.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/4389\/8217\/files\/LCD-101KFP.webp?v=1787220399","url":"https:\/\/takumi-supply.com\/products\/lcd-101kfp","provider":"Takumi Supply（タクミサプライ）","version":"1.0","type":"link"}